# ATR Technology

RF, microwave and millimeter wave components designed, manufactured and tested in-house from DC to 110 GHz.

Prices and stock are sample data. Online payments and order submission are not connected. Confirm requirements with engineering.

## BMA-2R3-10 · Coaxial Fixed Attenuator

SKU: BMA-2R3-10

10 dB fixed attenuator with SMA interfaces for level setting in laboratory and production test paths.

- Frequency band: DC–18 GHz
- Interface: SMA
- Power: 2 W
- Attenuation: 10 dB
- Frequency range: DC–18 GHz
- Nominal attenuation: 10 dB ±0.5 dB
- VSWR: ≤ 1.30 : 1
- Average power: 2 W at 25 °C
- Connector interface: SMA male / female
- Body material: Stainless steel, passivated
- Length: 28.5 mm
- Weight: 18 g
- Operating temperature: −55 °C to +125 °C
- Storage temperature: −65 °C to +150 °C

[Product page](https://mmwghz.com/products/attenuation/attenuators/bma-2r3-10-sma/)

## BFA-40-100 · High-Power Flange Attenuator

SKU: BFA-40-100

Flange-mounted 100 W attenuator for amplifier output stages and absorbing test benches.

- Frequency band: DC–6 GHz
- Interface: Flange
- Power: 100 W
- Frequency range: DC–6 GHz
- Nominal attenuation: 40 dB ±0.8 dB
- VSWR: ≤ 1.25 : 1
- Average power: 100 W with heat sink
- Connector interface: N female
- Mounting: Four-hole flange
- Body material: Aluminium, anodized
- Operating temperature: −40 °C to +100 °C
- Cooling: Conduction, forced air optional

[Product page](https://mmwghz.com/products/attenuation/attenuators/bfa-40-100-n/)

## BFT-18-50 · Flanged Termination

SKU: BFT-18-50

50 Ω flanged termination rated for continuous reverse power in compact amplifier modules.

- Frequency band: DC–18 GHz
- Interface: Flange
- Power: 25 W
- Frequency range: DC–18 GHz
- Impedance: 50 Ω
- VSWR: ≤ 1.30 : 1
- Power handling: 25 W at 25 °C
- Interface: 2.92 mm female
- Flange: 2-hole, 16 mm centres
- Body material: Stainless steel
- Operating temperature: −55 °C to +125 °C
- Finish: Gold over nickel

[Product page](https://mmwghz.com/products/attenuation/terminations/bft-18-50-292/)

## BRR-10-200 · Rod RF Resistor

SKU: BRR-10-200

Ceramic rod resistor for industrial power circuits that require stable dissipation over long duty cycles.

- Frequency band: DC–1 GHz
- Interface: Through-hole
- Power: 200 W
- Resistance range: 10 Ω to 1 kΩ
- Tolerance: ±5 %
- Rated power: 200 W at 25 °C
- Temperature coefficient: ≤ 250 ppm/°C
- Body: Ceramic tube, glazed
- Termination: Axial leads
- Length: 152 mm
- Operating temperature: −55 °C to +200 °C
- Humidity: 40 °C / 95 % RH

[Product page](https://mmwghz.com/products/attenuation/resistors/brr-10-200/)

## BTF-LPF-18 · Thin-Film Low-Pass Filter

SKU: BTF-LPF-18

Miniature low-pass filter on ceramic substrate for compact millimeter-wave receiver chains.

- Frequency band: DC–18 GHz
- Interface: Surface mount
- Power: 1 W
- Pass band: DC–18 GHz
- Insertion loss: ≤ 1.2 dB
- Stop band rejection: ≥ 30 dB at 22 GHz
- Impedance: 50 Ω
- Substrate: Al2O3 ceramic
- Size: 3.2 × 1.6 mm
- Mounting: Surface mount, gold pads
- Operating temperature: −55 °C to +125 °C
- Storage: Dry pack recommended

[Product page](https://mmwghz.com/products/film-platform/thin-film/btf-lpf-18-292/)

## BLC-BPF-28 · LTCC Band-Pass Filter

SKU: BLC-BPF-28

Multilayer LTCC band-pass filter for dense transceiver boards with space constraints.

- Frequency band: 18–40 GHz
- Interface: Surface mount
- Power: 0.5 W
- Centre frequency: 28 GHz
- Bandwidth: 2 GHz
- Insertion loss: ≤ 2.0 dB
- Rejection: ≥ 25 dB at ±3 GHz
- Substrate: LTCC multilayer
- Size: 3.0 × 2.0 mm
- Termination: Au plating
- Operating temperature: −40 °C to +85 °C
- Thermal cycling: Tested to 100 cycles

[Product page](https://mmwghz.com/products/film-platform/ltcc/blc-bpf-28/)

## BCF-6-100 · Cavity Band-Pass Filter

SKU: BCF-6-100

Machined cavity filter for narrow-band systems that need high rejection at the antenna port.

- Frequency band: 0.5–6 GHz
- Interface: SMA
- Power: 50 W
- Pass band: 5.9–6.1 GHz
- Insertion loss: ≤ 1.0 dB
- Rejection: ≥ 60 dB at 5.6 GHz
- Power handling: 50 W
- Housing: Aluminium, conductive finish
- Connectors: SMA female
- Mounting: Base plate, M3 inserts
- Operating temperature: −40 °C to +85 °C
- Vibration: Random, 10 g RMS

[Product page](https://mmwghz.com/products/filtering/filters/bcf-6-100-cavity/)

## BPD-4-18 · Four-Way Power Divider

SKU: BPD-4-18

Four-way divider with balanced amplitude and phase for antenna feeds and array distribution.

- Frequency band: DC–18 GHz
- Interface: SMA
- Power: 10 W
- Frequency range: DC–18 GHz
- Split: 4 way, 6.0 dB nominal
- Amplitude balance: ≤ 0.4 dB
- Insertion loss: ≤ 1.2 dB
- Connectors: SMA female, 5 ports
- Housing: Aluminium, nickel plated
- Size: 72 × 42 × 16 mm
- Operating temperature: −55 °C to +85 °C
- Impedance: 50 Ω

[Product page](https://mmwghz.com/products/power/power-dividers/bpd-4-18-sma/)

## BDC-20-40 · Thin-Film Directional Coupler

SKU: BDC-20-40

20 dB directional coupler in thin-film ceramic for power sampling in compact modules.

- Frequency band: 18–40 GHz
- Interface: Surface mount
- Power: 2 W
- Frequency range: 18–40 GHz
- Coupling: 20 dB ±1.0 dB
- Directivity: ≥ 15 dB
- Insertion loss: ≤ 0.8 dB
- Substrate: Thin-film ceramic
- Size: 2.5 × 1.3 mm
- Termination: Gold pads
- Operating temperature: −55 °C to +125 °C
- Storage: Nitrogen dry box

[Product page](https://mmwghz.com/products/power/couplers/bdc-20-40/)

## BWC-28 · Waveguide Circulator

SKU: BWC-28

Three-port waveguide circulator for transmitter isolation in millimeter-wave radios.

- Frequency band: 26.5–40 GHz
- Interface: Waveguide
- Power: 30 W
- Frequency range: 26.5–40 GHz
- Insertion loss: ≤ 0.5 dB
- Isolation: ≥ 20 dB
- Power handling: 30 W forward
- Waveguide: WR28 (BJ320)
- Flange: UG-599/U compatible
- Body: Nickel-plated brass
- Operating temperature: −40 °C to +85 °C
- Finish: Conductive passivation

[Product page](https://mmwghz.com/products/ferrite/circulators/bwc-28-wr28/)

## BWI-18 · Waveguide Isolator

SKU: BWI-18

Waveguide isolator that protects sources from reflected power in radar and satellite chains.

- Frequency band: 18–26.5 GHz
- Interface: Waveguide
- Power: 20 W
- Frequency range: 18–26.5 GHz
- Insertion loss: ≤ 0.6 dB
- Isolation: ≥ 22 dB
- Return loss: ≥ 18 dB
- Waveguide: WR42 (BJ220)
- Flange: UG-595/U compatible
- Body: Aluminium, chromate finish
- Operating temperature: −40 °C to +95 °C
- Shock: 30 g, 6 ms

[Product page](https://mmwghz.com/products/ferrite/isolators/bwi-18-wr42/)

## BDA-28 · Dielectric Resonator Antenna

SKU: BDA-28

Compact ceramic antenna for millimeter-wave modules where metal radiators are impractical.

- Frequency band: 26.5–40 GHz
- Interface: Surface mount
- Power: 5 W
- Frequency range: 26.5–32 GHz
- Gain: 6 dBi typical
- Impedance: 50 Ω
- Polarization: Linear
- Material: Ceramic, low loss
- Size: 4.0 × 4.0 × 2.5 mm
- Mounting: Surface mount
- Operating temperature: −40 °C to +105 °C
- Humidity: 85 % RH, non-condensing

[Product page](https://mmwghz.com/products/antenna/antennas/bda-28-dielectric/)

## BWT-28 · Waveguide Termination

SKU: BWT-28

WR28 termination for absorbing reflected power during waveguide assembly and test.

- Frequency band: 26.5–40 GHz
- Interface: Waveguide
- Power: 10 W
- Frequency range: 26.5–40 GHz
- VSWR: ≤ 1.15 : 1
- Power handling: 10 W average
- Impedance: Waveguide, 50 Ω equivalent
- Waveguide: WR28 (BJ320)
- Body: Aluminium, black anodized
- Length: 38 mm
- Operating temperature: −40 °C to +85 °C
- Finish: Chem-film conversion

[Product page](https://mmwghz.com/products/antenna/waveguide/bwt-28-wr28/)

## BWT-10 · Waveguide Termination, W-Band

SKU: BWT-10

WR10 termination for 75–110 GHz bench setups where the load has to stay stable through the band.

- Frequency band: 75–110 GHz
- Interface: Waveguide
- Power: 5 W
- Frequency range: 75–110 GHz
- VSWR: ≤ 1.20 : 1
- Power handling: 5 W average
- Impedance: Waveguide, 50 Ω equivalent
- Waveguide: WR10 (BJ900)
- Body: Brass, gold plated
- Length: 25 mm
- Operating temperature: −40 °C to +85 °C
- Finish: Gold over nickel

[Product page](https://mmwghz.com/products/antenna/waveguide/bwt-10-wr10/)

## BDP-6 · Dielectric Duplexer

SKU: BDP-6

Dielectric duplexer for shared antenna ports with low insertion loss in both paths.

- Frequency band: 0.5–6 GHz
- Interface: SMA
- Power: 20 W
- Frequency range: 0.8–6 GHz
- Insertion loss: ≤ 1.2 dB
- Isolation: ≥ 70 dB
- Power handling: 20 W
- Connectors: SMA female
- Housing: Aluminium, painted
- Mounting: Base plate
- Operating temperature: −30 °C to +75 °C
- Humidity: 95 % RH

[Product page](https://mmwghz.com/products/filtering/duplexers/bdp-6-dielectric/)

## BBO-10 · Beryllium Oxide Substrate

SKU: BBO-10

Beryllium oxide ceramic substrate for circuits that need high thermal conductivity.

- Frequency band: Material platform
- Interface: Substrate
- Power: Thermal 250 W/m·K
- Dielectric constant: 6.7 at 10 GHz
- Loss tangent: ≤ 0.0005
- Breakdown strength: > 10 kV/mm
- Thermal conductivity: 250 W/m·K
- Thickness: 0.25–1.0 mm
- Surface finish: As-fired or polished
- Max operating temperature: 300 °C
- Handling: Dust control required

[Product page](https://mmwghz.com/products/film-platform/materials/bbo-10-submount/)

