DC–18 GHzBMA-2R3-10 · Coaxial Fixed Attenuator
- Faixa de frequência
- DC–18 GHz
- Power
- 2 W
- Interface
- SMA
Atenuadores, terminações, filtros e conjuntos de guia de onda projetados, fabricados e testados internamente de DC a 110 GHz.

Interface
2.92 mm precision
Finish
Gold over nickel
DC–110 GHz
Frequency coverage
14
Famílias de produtos
In-house
Design, build & test
Custom
Bands, flanges, housings

Level control, protection and power absorption.
Explore family →
Miniature circuits on ceramic substrates.
Explore family →
Selectivity for crowded spectrum.
Explore family →
Dividers and couplers for array feeds.
Explore family →
Protect sources from reflected power.
Explore family →
Radiating and guiding millimeter waves.
Explore family →RF design, thin-film fabrication, machining and test are kept under one roof so the part that leaves the bench matches the drawing.
Our capabilitiesCircuit and electromagnetic simulation before the first cut, with mechanical co-design so the housing does not undo the electrical performance.
Sputtered thin-film patterns, ceramic substrates and LTCC laminates produced to the drawing, including beryllium oxide where thermal load is high.
Aluminium and brass housings machined in-house, then assembled with the connectors, absorbers and ferrite parts specified for the band.
Every production lot is measured on calibrated vector network analysers, with power and environmental screening available on request.
DC–18 GHz
0.5–6 GHz
DC–18 GHz
26.5–40 GHzStart from the system you are building, then narrow the catalog by band and interface.
Assembly · JiaxianRequirements, band plan and mechanical envelope are agreed before simulation begins.
Thin film, machining, plating and assembly are carried out under one roof in Jiaxian.
Insertion loss, return loss and power handling are verified and recorded per lot.
ATR Technology designs and manufactures RF, microwave and millimeter wave components for engineers who need the measured performance to match the datasheet. The catalog spans fourteen families, from attenuators and terminations to waveguide assemblies for bands up to 110 GHz.


Three numbers decide whether a fixed attenuator survives your test bench. Here is how to read them together.
Read
A short walk through how a custom waveguide assembly moves from drawing review to first-article measurement.
Read
Why filter footprint, substrate choice and assembly tolerance matter more as front ends move above 20 GHz.
ReadRFQ · Engineering review
Include band, power, interface and quantity. Datasheets are available on request.