Skip to main content
DC–110 GHz 14 Product families Jiaxian, Henan · China+86-1771-9061-040RF · Microwave · mmWave
Industry Insights2026-10-226 min read

Reading an Attenuator Datasheet: Power, VSWR and Flatness

Three numbers decide whether a fixed attenuator survives your test bench. Here is how to read them together.

Reading an Attenuator Datasheet: Power, VSWR and Flatness

Attenuator datasheets look similar until the operating conditions are read line by line. Average power is usually quoted at 25 °C on a heat sink. Without that sink, the same part may only handle a fraction of the number, and the derating curve matters more than the headline figure.

VSWR describes what comes back toward the source. In a bench setup where a mismatched load already reflects energy, an attenuator with modest VSWR can shift the measurement more than expected. Check VSWR at the band edges, not only at the centre frequency.

Attenuation flatness is the third number. A part specified as 10 dB ±0.5 dB across the band behaves differently from one specified 10 dB ±0.5 dB at a single frequency. For level accuracy work, ask for the flatness curve and the test setup used to produce it.

When a standard part does not fit, the fastest path is usually a short message with the band, power, interface and allowable envelope. That is enough for our engineers to confirm whether a catalogue item or a small mechanical change will solve it.