Skip to main content
DC–110 GHz 14 Product families Jiaxian, Henan · China+86-1771-9061-040RF · Microwave · mmWave
Industry Insights2026-08-305 min read

Thin-Film Filters in Dense Millimeter-Wave Front Ends

Why filter footprint, substrate choice and assembly tolerance matter more as front ends move above 20 GHz.

Thin-Film Filters in Dense Millimeter-Wave Front Ends

Above 20 GHz the filter is often the largest passive on the board, and the one most sensitive to how it is attached. A thin-film pattern on a low-loss ceramic substrate keeps the resonator dimensions practical while holding insertion loss in check.

The assembly tolerance is part of the electrical design. Ground via placement, epoxy thickness and pad geometry all shift the response. Designing the launch together with the filter avoids the common situation where a good filter measures poorly once mounted.

For volume programs, the practical question is often delivery format rather than topology: waffle pack for engineering builds, tape and reel for assembly lines, with the same measured sample data attached.